IN-SITU HIGH TEMPERATURE NITROGEN OXIDE ANALYZER

CPA certified, dual cell thick film zirconia principle, NO nitrogen oxide converter (No 2 to No) , sample gas NO condensation cooling, directly installed in pipes or chimneys, built-in filter and back purge unit, direct analysis and measurement of high temperature flue gas below 500 °C. 7-inch color LCD touch screen, RS485 and 4-20mA output, with concentration alarm function, can be calibrated online, no need to station room, air-conditioning room, simple and convenient installation.

ON-LINE FLUE GAS MONITORING SYSTEM (CEMS)

Our self-developed continuous monitoring system for NOx nitrogen oxide in flue gas uses in-situ plug-in CEMS to measure NOx and other parameters, two-cell thick-film zirconia was used to analyze NOx. Temperature, pressure and flow velocity were measured by thermistor (PT100) , pressure sensor and pitot tube micro-pressure difference method. Humidity was measured by capacitance method. The output parameters were: NOx, O2, temperature, pressure, flow velocity and humidity: 4-20mA

3U CABINET NITROGEN OXIDE ANALYZER

CPA certificate, double cell thick film zirconia principle, pump measurement, NO need for nitrogen oxide converter (No 2 to NO) , 7-inch color LCD touch screen, RS485 and 4-20mA output, with concentration alarm function, can be calibrated on-line, 19” 3U standard cabinet installation.”. The measurement range: Nox: 0-1500 μmol/mol (range optional) O2:0-21.00% Accuracy: ± 2% FS